Prusa Research MMU3 Manual Del Usuario página 71

PASO 5 Assembly (part 2)
Insert the first buffer plate into the marked bottom opening in the Segmenter. Push
it all the way in so that the screw openings line up.
Make sure the buffer leg and the cutout parts of the sheet are on opposite sides - as
seen in the picture.
Attach the printer holder to the marked position on the buffer sheet. For now, it
should be pointed up. The sheet should attach to the bottommost opening in the
printer holder.
Orient the whole assembly so that the buffer sheet is standing up. Both the printer
holder and the Leg should be on the ground.
PASO 6 Assembly (part 3)
Insert the remaining 5 buffer plates into the corresponding openings on the
Segmenter and Printer holder.
The whole assembly now should look like the one in the second picture.
7. Montaje del Casete del buffer
Ensamblaje Original Prusa MMU3 71