Unpleasant odors and smoke can be released and irritant fumes and gases during a program operation.
Therefore, we recommend that you ensure thorough ventilation of the kitchen during the program
process. We advise against staying in the room for a long period of time. Do not let children and pets
near the appliance while using this mode.
INFORMATION!
We recommend using this function once per month.
WARNING!
Do not use cooktop during the Self Clean mode.
If you try to use the cooktop while the Self Clean mode is in use "Hob" will appear
on upper display and will be toggled with Self Clean intensity sign. If cooktop is not
turned off within one minute, Error 14 is displayed and Self Clean function will stop.
Remove any cookware from the cooktop area.
During the cleaning program, the appliance becomes very hot on the outside. Do not
touch the oven door and never hang any combustible objects, such as kitchen cloths
or towels, on the door handle.
The oven door is locked. Do not try to open it!
Small animals or pets can be particularly sensitive to any fumes. We recommend
removing them from the kitchen while this function is active, and ventilating the
kitchen thoroughly after the cleaning process.
As a result of the Self Clean cleaning, the oven cavity and the oven accessories may
discolor and lose their sheen. This does not affect the functionality of the oven or
the accessories/equipment.
Before cleaning the oven with Self Clean function, remove the oven racks and other
accessories.
Steam Clean
The Steam Clean function allows easier removal of soils in the oven using steam.
This function is most effective when used regularly.
Before running the Steam Clean program, remove all large chunks of dirt and food residue from the
oven cavity.
Briefly press the Self Clean key and touch
cleaning intensity. Confirm the settings by pressing on the
Lock and program duration will appear on display (the door will be
locked). The default cleaning duration is 3 hours.
When the temperature drops to bellow 400 °F, the appliances will unlock
and go to a stand-by state.
Once the oven cavity has fully cooled down, wipe it with soap and a soft
cloth to remove any residue (e.g. ashes).
or
to set the desired
symbol.
EN 25