Publicidad
Idiomas disponibles
Idiomas disponibles
9. Dusts produced by construction
activities such as powered grinding,
sawing, grinding, drilling, and so on will
result in cancer, birth defect and other
reproductive harm. There are some
examples of these chemicals, such as lead
in lead-based paint, crystalline silica in
masonry products such as bricks,
concrete, and so on, and arsenic and
chromium in chemical-processed wood.
Your exposure risks differ based on the
frequency of your occupation. To reduce
contact with these chemicals, work in
areas with good air ventilation, and use
authorized safety equipment, such as
masks designed for filtering micro
particles or anti-dust masks.
10. Do not operate on this machine with
the influence of tiredness, drugs, alcohols,
or any medications.
11. Before connecting the machine to the
power source, ensure that the switches are
turned off.
12. Ensure the machine is properly
grounded.
13. All machine adjustments (replacing
filter) or maintenance must be conducted
only after the power plug is unplugged.
14. During disassembly and adjustment of
the machine, develop the habit of check,
to check whether the components and
adjustment wrench are missing after
assembly.
03
15. During operation of the machine, keep
the safety warning in place all the time. If it
is removed due to maintenance purposes,
replace the machine promptly.
16. Check damaged components. Before
further using the machine, check the filter,
cover, or other damaged components
carefully, to ensure it is working properly
and implement the expected functions.
Check whether the sling chain is secure,
whether the installation affects the
operations, or whether the remote control
cannot point directly to the receive end
(the remote control uses infrared control,
and the infrared ray from the remote
control to the receive end of the machine
cannot be blocked. Otherwise, the using
effect may be affected.). If the cover or
other component is damaged, repair or
replace it promptly.
17. Provide the working area surrounded
with sufficient light, no dazzle light, to
illuminate.
18. Keep the surrounding floor of the
machine clean, with no waste materials,
oil, and grease.
19. Keep a safety distance between visitors
and working area. Children should not
approach the area.
20. Use chain to hang the machine and
keep the remote control, to prevent
children from harm caused by malopera-
tion in the workshop.
https://www.altonindustries.com
Publicidad
