Publicidad
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
1. Machine buttons and functions:
2. Remote control: Buttons have the
same functions with those on the
machine.
3. TIME button can be operated on the
machine panel or remote control.
It controls different power-on time
configurations.
Press (TIME) one time, 1H light is on, and
the machine turns off after one hour
operation.
Press (TIME) twice, 2H light is on, and the
machine turns off after two hour
operation.
Press (TIME) tree times, 1H and 2H lights
are on, and the machine turns off after
three hour operation.
Press (TIME) four times, 4H light is on,
and the machine turns off after four
hour operation.
4. Wind level control button (SPEED):
The button can be operated on the
machine panel or remote control.
It controls three levels of wind (HI, MID,
LO)
5. Switch-on/off button (ON/OFF) on
the remote control and machine panel
can be used to control the machine.
6. Fuse (figure): In overload status, the
fuse will blow out. Use a cross
screwdriver to take out the blown fuse,
and replace it with a same 2A fuse.
07
REPLACING THE FILTER
"Warning" is to reduce the risks of
injuries. Please disconnect the power
supply (unplug the power plug) of the
air purifier and then replace/repair the
filters. If you do not comply with the
regulations, severe harm may be caused!
Both of the two filters, internal and
external ones, need to be cleaned or
replaced. The external filter can be taken
off and replaced easily. Use hands to
remove the back cover to replace the
filter.
Be mindful of the direction of the prefilter
during replacement. (Figure)
https://www.altonindustries.com
Publicidad
