Publicidad
Idiomas disponibles
Idiomas disponibles
No.
1
LCD display
2
[ON/OFF/M] button:
At power saving mode (unlit display) press the [ON/OFF/M] button
to turn on device.
At standby mode, press the [ON/OFF/M] button to select the
treatment mode (TENS, EMS o MASS); at standby mode, press and
hold the [ON/OFF/M] button to turn off the device.
At treating mode,(when the intensity has already been selected)
press the [ON/OFF/M] button to stop the treatment.
At setting mode, (after selecting the programme) press the
[ON/OFF/M] button to enter the standby mode.
3
[T] button:
At standby mode, press the [T] button to increase the treatment
time (every 5 minutes); Press and hold the [T] button to set the
frequency, pulse width and time (for U programmes only)
At setting mode, press and hold [ T] button to select pulse rate,
pulse width or treatment time - note : adjust the parameters each
time by pressing the + or - key, confirm with the T key, then Press
and hold the [T] button to set the frequency, pulse width and time
(for U programmes only)
4
[CH] button:
At standby mode and treating mode, press the [CH] button to
select the treatment channel.
5
[-] button:
At treating mode, press the [-] button to decrease the intensity of
CH1 and CH2 , CH1 or CH2.
At setting mode, press the [-] button to decrease the corresponding
data for the pulse rate, pulse width and treatment time.
6
[+] button:
At standby or treating mode, press the [+] button to increase the
intensity of CH1 and CH2, CH1 or CH2 ;
At setting mode, press the [+] button to increase the corresponding
data for the pulse rate, pulse width and treatment time.
7
[P] button:
At standby mode, press the [P] button to select the treatment
program.
In standby mode, for MASS programmes, press and hold the [P]
button to select the desired massage type, each time the button is
held down the massage type changes".
At treating mode, press and hold the [P] button turn on/off lock
function.
8
Belt Clip
9
USB socket and Charger indicator:
When the device is charging, the indicator light will be red
When charging is completed, the indicator light will be green
10
Output socket to which the two cables are connected
Tesmed copyright - it is absolutely forbidden the partial or total reproduction of any present content
Description
58
Publicidad
