Publicidad
Idiomas disponibles
Idiomas disponibles
6. INSTRUCTIONS FOR USE
6.1 Turn on
Press the [ON/OFF/M] button to switch on the device; the LCD
display lights up. The backlight without operation remains for
about 10 seconds after which the display switches to power-sa-
ving mode. Pressing the [ON / OFF / M] button switches to stan-
dby mode as shown in the following picture:
Attention, the device switches off after about 1 minute of inactivity.
After the first use, if the device is switched on again, it may show
the previously selected programme.
6.2 Select treatment mode
Press the [ON/OFF/M] button to select which treatment
mode (TENS - EMS‒ MASS) you will use. The LCD displays
as follows:
6.3 Select treatment program
Based on your need, press [P] button to select the treatment
program. The LCD displays as follows:
Tesmed copyright - it is absolutely forbidden the partial or total reproduction of any present content
66
Publicidad
