6.13 Usage of electrode pads
1. The electrode may only be connected with the COMBO
stimulator. Make sure that the device is turned off when
attaching or removing the electrode pads.
2.
If you want to reposition the electrode during the application,
turn the device off first.
3.
The usage of electrode may lead to skin irritations. If you
experience such skin irritations, e.g. redness, blistering or
itching, discontinue using them. Do not use the COMBO
stimulator permanently on the same body part, as this may
also lead to skin irritations.
4.
Electrode pads are private and intended for single person
use. Please avoid using them by different persons.
5.
The electrode must connect entirely to the skin surface to
prevent hot spots, which may lead to skin burns.
6.
It is not advisable to use electrodes when they no longer
adhere well to the skin. With proper use, an average of
about 30 treatments can be made.
7.
The adhesive force of the electrodes depends on the
skin properties, storage condition, and the number of
applications. If your electrode pads no longer fully stick to
the skin's surface, replace them with new ones. Stick the
electrode pads back onto the protective foil after use and
store them in the storage bag to prevent them from drying
out. This retains the adhesive force for a longer period.
Caution:
1)
Before applying the electrode, it is recommended for users to
wash and degrease the skin, and then dry it.
2)
Never remove the electrode from the skin while the device is
still on.
3)
Only use the electrode pads provided by the manufacturer.
Usage of other companies' products could result in injuries
to the user.the electrodes in such way the affected muscles
are also enclosed by the electrodes.
Tesmed copyright - it is absolutely forbidden the partial or total reproduction of any present content
73