Publicidad
Idiomas disponibles
Idiomas disponibles
g
Contents
of Carton
1 - Air Compressor
2-
Wheels
2 - Shoulder Bolts, 3/8-16
2 - Nex Nuts, 3/8-16
2 - Rubber Bumpers
2 - Screws, 1/4-20 x 3/4
Assemble
Wheels
It win be necessary
to brace or support
one side of the air compressor
when installing
the wheeBs because
the compressor
will have a
tendency
to tip,
1.
Attach wheels with shoulder
bolts and nuts as shown.
Tools
Required
for Assembly
1 - 9/16" socket or open end wrench
1 - 1/2" socket or open end wrench
Unpacking
1_
Remove a!l packaging leaving
the air compressor on the pallet.
2.
Remove and discard the
(4) screws holding the air
compressor to the palleL
_}
Rubber
Feet
, Screw
Wheel
Shoulder
Belt
one side of the air compressor
when removing
the pallet because
the air compressor
win have a
tendency
to tip,
3.
Carefully remove the air
compressor from the pallet.
2.
Tighten securely. NOTE: The air
compressor
wilI sit level if the
wheels are properiy installed.
The wheems and
handme do not
provide
adequate
c_earance,
stability
or support
for pulling the
unit up and down stairs or steps,
The unit must be mifted, or pushed
up a ramp,
Assembme Rubber Feet
1.
Attach rubber feet with the
screws provided as shown in
previous figure.
2.
Tighten securely.
A09707
10-ENG
Publicidad
