Fronius Robacta Drive CMT W Manual De Instrucciones página 43

5
Fitting the wire IMPORTANT! Use only contact tubes with centre holes.
guide insert
* If a Robacta 280 45° torch body is being used, the wire guide 44,0350,1806 can
only be fitted and removed from the front.
IMPORTANT! When cutting the wire guide insert to length, make sure that
-
-
-
Use the power tong (item no. 42,0435,0009) to shorten the steel wire guide.
1
the contact tube is firmly attached to the torch neck
the wire guide insert butts right up against the contact tube
Deburr the inside of the wire guide insert.
2
1
6
2
*
Robacta 280 45°
1
43