Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECTING THE QUICK CONNECT LANCE AND STAINLESS STEEL
WAND (Fig. 6)
1. To connect the wand to the lance, install the external threaded end of the wand
onto the internal threaded end of the lance, and then screw them together tightly
(Fig. 6a).
6a
2. To connect the lance to the gun (Fig. 6b):
a. Screw the knob on the lance to fully expose its connection joint.
b. Insert the lance into the quick-coupler of the gun until you hear a "click".
The outer ring of the quick-coupler will move forward automatically, which
indicates the connection is established properly.
c. Screw the knob on the lance to tighten the connection.
6b
To disconnect,
1. Screw the wand from the lance and then pull it out.
2. Screw the knob on the lance to loosen the connection, then pull back the outer
ring of the quick-coupler of the gun to pull out the lance.
20
56-VOLT LITHIUM-ION PRESSURE WASHER — HPW3200/HPW3200-FC
a
a
b
c
b
Publicidad
