PROBLEM
The water spraying
starts or stops
automatically.
The gun cannot control
the washer.
56-VOLT LITHIUM-ION PRESSURE WASHER — HPW3200/HPW3200-FC
CAUSE
◾
The high-pressure hose is
damaged.
◾
There's water leakage from
the gun.
◾
Pump seals, hose seals are
worn.
◾
The position of the gun is
beyond wireless connection
range.
◾
The coin cell (button cell)
battery charge is low.
◾
The gun is not paired
properly.
◾
Coin cell battery is not
installed properly.
SOLUTION
◾
Replace with new high-
pressure hose.
◾
Contact EGO customer
service.
◾
Take the gun closer to the
pressure washer.
◾
Replace with a new coin cell
(button cell) battery.
◾
Complete the pairing following
the instructions in the section
"Short Pressure Gun Pairing".
◾
Install the coin cell battery
following the instructions in the
section "REPLACING THE COIN
CELL BATTERY".
39