Publicidad
Idiomas disponibles
Idiomas disponibles
To Stop the Pressure Washer
1. Once the washing is completed, release the trigger and press the lock-off button
to lock position.
2. Press the power button to power down the pressure washer.
3. Close the water faucet or remove the siphon hose from the water bucket.
4. Press the lock-off button of the gun to the unlock position and squeeze the
trigger to empty the water from the hoses.
NOTICE:
The gun, hoses, wands, nozzles, or foam cannon should not be disconnected
for as long as the water remains in the hoses.
5. Disconnect and remove the gun, hoses, wands, nozzles, or foam cannon.
6. Press the power button to power on the pressure washer to empty the water in
the pressure washer.
7. Press the power button again to power down the pressure washer.
8. Remove the battery pack(s).
REMOTE CONTROL
The gun can be paired with the pressure washer to function as a remote control.
Short Pressure Gun Pairing
(Fig. 12)
1. Insert the battery pack(s) and
power on the high pressure washer.
2. Long-press the speed button on the
high pressure washer unit until its
three green lights start flashing.
NOTE:
The flashing will last
approximately 20 s, so the gun can be paired only during this time. You could also
short-press the speed button on the washer to exit the pairing mode any time.
3. Long-press the speed button on the gun until its three green lights start flashing,
which means the pairing process has started.
28
56-VOLT LITHIUM-ION PRESSURE WASHER — HPW3200/HPW3200-FC
12
a
b
Publicidad
