Publicidad
Idiomas disponibles
Idiomas disponibles
Step 1
Press the buttons at the sides of the door
trim (A) on the upper cover and pull it up‐
wards to remove it.
Step 2
Hold the inner glass B tightly with both
hands and slide it upwards to remove it
from its initial position. Do the same with
the second glass panel.
Make sure that you tightly hold the
glasses to prevent them from falling.
Step 3
Clean the door with a wet sponge and rub
it dry with a soft cloth. Do not use steel
wool, acids or abrasive cleaning agents
because they can damage the surface.
When the oven door is clean, install the glass panels in
the opposite sequence. The middle glass panel (B) has
a decorative frame. In some models, the glass panel
(A) has screen printings. In others, it is transparent. The
screen-printing zone must face the inner side of the
door. Make sure that after the installation the surface of
the glass panel frame is not rough when you touch it.
12.6 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Always hold the halogen lamp with a cloth to
prevent grease residue from burning on the
lamp.
A
B
B
A
ENGLISH
25
Publicidad
