Samsung WF210 Serie Manual Del Usuario página 33

[- Temperaturesensor problem.
Zlt-
High current detected.
High/Low voltage detected.
CIZ
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it finishes washing, End and
Sd codes will blink in turn.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
To prevent, reduce the amount of detergent.
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG)
troubeshooting and informaton codes 33
WF210AN-02832A EN.Jndd 33 2010-02-09
o_,,,f
1:15:18