Zenit UNIQA Serie Manual De Instalacion Y Uso página 51

better together
Enclosure type M08S - M08L - M10S - M10L - M12N - M13N - M15N - M17N - M21S - M21L
2. Identify the plugs of the pump's oil sump.
4. Unscrew the plug on the bottom of the oil sump.
Safety, Installation and Operations Manual – Translation of original instructions
Version WET
1. Position the pump on a firm, even surface;Use a suitable
lifting system of appropriate size.
Secure it to prevent it from rolling or rocking.
3. Unscrew the plug on the top of the oil sump.
5. Allow the oil to drain into a vessel of suitable size,
transparent if possible.
NOTE: to check that the vessel is of sufficient capacity,
refer to the Table for the amount of oil in the sump.
EN
51