Publicidad
Idiomas disponibles
Idiomas disponibles
Displaying Information on the LCD Panel
1.
Die type
This is the type of die-set that is currently installed in the
punch.
2.
Die cycles
This is the total number of sheets punched with the currently
installed die-set.
3.
Punch cycles
This is the total number of punched sheets the system has
processed.
4.
Firmware
This displays the current level of firmware of FuturoPunch Pro.
6. PROBLEM SOLVING
Probable Cause
No power, won't punch
Punched holes not aligned with
the edge of the paper
Sheet jamming repeatedly at
die set area.
Insert Chip tray message on the
LCD interface.
Probable Cause
Power cord not attached to back
of
machine
or
not
properly
plugged into the wall.
Power
On/Off
Switch
not
activated
Follow instructions on die set
labels to properly configure the
die for a specific sheet size
Remove the die-set, inspect the
die throat to see if there is any
stuck paper chad.
Make sure the Chip tray is fully
inserted.
FuturoPunch Pro
7. SPECIFICATIONS
Speed
Punch Sheet Size and
Edge
LEF- Long Edge Fed
SEF- Short Edge Fed
Paper Stock
Paper Bypass Mode
Sheet size
Punch Capacity
Power Supply
Electrical
Safety Certification
Dimensions
Weight
Shipping Weight
Manufactured
Up to 144 sheets per minute
US Sizes
LTR LEF
LTR SEF
Statement LEF
Legal SEF
Ledger SEF
Ledger SEF Double Punch
9" x 12" SEF
9" x 12" SEF Double Punch
9" x 12" LEF
12" x 18" SEF
12" x 18" SEF Double Punch
ISO sizes
A4 LEF
A4 SEF
A5 LEF
A3 SEF
A3 SEF Double Punch
SRA4 SEF
SRA4 SEF Double Punch
SRA4 LEF
SRA3 SEF
SRA3 SEF Double Punch
Plain: 75gsm - 300gsm
(20# bond to 110# cover)
Coated: 120gsm - 300gsm
(32# bond to 110# cover)
Paper sizes and stocks same as
printer
Single Sheet
115V, 60Hz, Single Phase
Amps and
115V: 3.8A; 60Hz
Frequency
cULus
L: 730mm; W: 445mm; H: 990mm
L: 29"; W: 17.5"; H: 39"
97 kg
214 lbs
125 kg
276 lbs.
Assembled in Taiwan
GB
9
Publicidad
