Vacmaster Respira UC0501 Manual De Uso Y Cuidado página 17

3. Position dust cup area of vacuum over a waste receptacle. Press down on
the dust release button to open dust lid and allow contents to drop into waste
receptacle.
4. Shake the dust cup to release any debris that might hang in the pre-filter.
5. Reinstall and insert the dust cup into the slots on the bottom of the main body,
then press the dust cup into locked slot and click into place.
Cleaning the Felt Filter and Primary Filter
The felt filter and primary filter are fixed together and located inside the dust cup
lid.
It is recommended to clean the felt filter and primary filter with cold water at least
once a month. Check the felt filter and primary filter frequently and clean when
dirty.
2
Dust Cup
1
Dust Release Button
-17-