Vacmaster Respira UC0501 Manual De Uso Y Cuidado página 26

1. Remove the hose end from the main body.
2. Remove the other end of the hose from the lower hose connection by pressing
the hose release latch.
3. Check and remove any clogs in the hose.
4. Reinstall the hose to the vacuum cleaner. See GENERAL ASSEMBLY
INSTRUCTIONS (page 7).
Checking the hose for clogs:
1. Check and remove any clogs in the connection hose.
2. If necessary, release the connection hose by removing one screw with a
Phillips head screwdriver and check for clogs.
3. Reinstall the connection hose and fix with the screw. Do not over-tighten the
screw.
1
2
Connection Hose
-26-