Publicidad
Idiomas disponibles
Idiomas disponibles
iNSTallaTiON
installation
2
1
1 Flow limiter
2 Plastic profile washer
Note
For the thermostatic valve to function correctly, the flow
limiter must not be replaced with the plastic profile wash-
er.
8
| DHB-E
10. Installation
Standard installation
- Electrical connection from below on unfinished walls
- Water connection on unfinished walls
For further installation options, see chapter "Installation /
Installation options":
- Electrical connection from above on unfinished walls
- Electrical connection on finished walls
- Large conductor cross-section for electrical connection from
below
- Connecting a load shedding relay
- Water installation on finished walls
- Water installation on finished walls with solder/press-fit
fittings
- Water installation on finished walls; fitting the appliance
cover
- Fitting the base part of the back panel with threaded fittings
on finished walls
- Wall mounting bracket when replacing an appliance
- Installation with offset tiles
- Pivoting appliance cover
10.1 Standard installation
Opening the appliance
ele ctr on
elec tron
f Open the appliance by pulling the flap downwards, undo the
f
screw and lift up the appliance cover.
f Remove the back panel by pressing the two locking tabs and
f
pulling the lower section of the back panel forwards.
ic
ic
www.stiebel-eltron.com
Publicidad
