Inferno LCD710 Instrucciones De Uso página 5

CHARGING MODES
LCD710 has 12 modes: Standby, 12V STD, 12V COLD/AGM, 12V LITHIUM (LiFePO4), 12V CAL, 24V
STD, 24V COLD/AGM, 24V CAL , 13.6V SUPPLY, REPAIR, 12V ALTERNATOR CHECK, BATTERY HEALTH
CHECK. Do not operate the charger until you confirm the appropriate charge mode for your battery.
CAUTION: If you choose 24V Mode(s) for 12V battery, the 12V battery will be damaged.
MODE
Standby
12V STD
12V COLD/AGM
12V CAL
24V STD
24V COLD/AGM
24V CAL
12V LITHIUM
REPAIR
13,6 V-SUPPLY
12V ALTERNATOR CHECK
BATTERY HEALTH CHECK
BATTERY SIZE (AH)
–––
14-230
14-230
14-230
14-115
14-115
14-115
14-230
14-230
–––
–––
–––
EXPLANATION
Not charging or providing any power. The user can check
the Remaining Battery Capacity (State of Charge)
Charging 12V STD batteries
Charging 12V batteries below 10 °C or 12V AGM battery
Charging 12V CAL batteries
Charging 24V STD batteries
Charging 24V batteries below 10 °C or
24V AGM battery (Green LED)
Charging 24V CAL batteries
Charging 12V lithium-ion (LiFePO4) batteries only
An advanced battery recovery mode for repairing
old, idle, stratified or sulfated batteries.
Converting to a DC power supply for powering 12V DC
device or as a memory retainer when replacing a battery
Check vehicle's alternator output
Check battery health(LEAD-ACID only), including
SOC,SOH,CCA and internal resistance
// USER GUIDE_EN 5