baby joy BC10126 Manual Del Usuario página 7

- EN -
ASSEMBLY
To install mattress into the playard proceed
to Step 4.
4) • Place the Mattress on the floor of the Playard
with the padded side facing up (Fig. 4).
Fig. 4
5) • Insert the hook & loop fasteners located on
the underside of the mattress through the
slots in the floor of each end of the playard
(Fig. 5a). Fasten the hook and loop fasteners
to the underside of the playard floor to prevent
the mattress from moving (Fig. 5b).
IMPORTANT: The handle located in the
Fig. 5a
center of the Playard floor MUST remain
raised (Approx. 45.7 cm or 18 inches) while
locking the side rails in place. If the center is
not raised the rails will NOT lock.
If you experience difficulty and one side of
the rail will lock but the other side will not
then, unlock the rail by squeezing the release
in the center and try again.
Fig. 5b
6) • To operate the brakes on the wheels, press
downward on the brake levers. To release, lift
upward on the lever (Fig. 6).
Fig. 6
07