baby joy BC10126 Manual Del Usuario página 8

- EN -
FOLDING PLAYARD
7) • Release the hook and loop fastener holding
the Mattress from underneath the Playard floor
or the Bassinet and set the mattress aside.
DO NOT unlock top rails yet, center of floor
handle must be raised before top rails will
unlock.
• Rotate the center handle counter-clockwise
90 degrees and raise the center as high as
the top rails (Fig. 7). Gather the Legs and
Wheels together towards the center as close
as possible so that they nearly touch.
8) • Locate the rail latch release in the center and bottom side of each rail.
Squeeze the lever with two hands until the rail releases the two tubes (Fig.
8a), then push down (Fig. 8b). NOTE: If the top rail(s) do not release
completely, DO NOT FORCE! Lift the center of floor higher. Both tubes must
be released for the top rail to fold.
Center latch
Tube
Latch release
TOP RAIL
Fig. 8a
9) • Gather all four (4) corners and
the center together tightly (Fig. 9).
Wrap Mattress around Playard frame
with padded side facing inward.
Fig. 9
Tube
10) • Secure the hook and loop
fasteners by feeding them through
the loops on the end of the mattress
then fold them back onto themselves
(Fig. 10).
Place folded Playard into carry bag so
that the handle comes through the
opening between each side of the
zipper.
08
Rotate before lifting
Fig. 7
Fig. 8b
Fig. 10