CARLO GAVAZZI CA12CA Manual De Instrucciones página 19

2.5.2.2. Two point mode procedure
1) Two value teach command sequence:
#67 "SP1 two value teach TP1"
#68 "SP1 two value teach TP2"
#64 "Teach apply" (optional command)
#69 "SP2 two value teach TP1"
#70 "SP2 two value teach TP2"
#64 "Teach apply" (optional command)
Command Sequence
1) "SP1 Two value Teach TP1"
2) "SP1 Two value Teach TP2"
3) "Teach Apply"
4) "SP2 Two value Teach TP1"
5) "SP2 Two value Teach TP2"
6) "Teach Apply"
2) Dynamic teach command sequence:
#71 "SP1 dynamic teach start"
#72 "SP1 dynamic teach stop"
#73 "SP2 dynamic teach start"
#74 "SP2 dynamic teach stop"
#64 "Teach apply" (optional command)
Command Sequence
1) "SP1 Dynamic Teach Start"
2) "SP2 Dynamic Teach Stop"
3) "Teach Apply"
SSC
Sensor
SSC
Sensor
Rev.00 - 10.2023 | CA12CA/EA/KA Capacitve sensors with IO-Link interface | © 2023 | CARLO GAVAZZI Industri
Sensing distance
Sensing distance
19