CARLO GAVAZZI CA12CA Manual De Instrucciones página 26

5. Operation
5.1. User interface of CA12CA/EA/KA...IO
CA12CA/EA/KA...IO sensors are equipped with one yellow and one green LED.
Green LED
ON
ON
OFF
OFF
-
-
Flashing 1 short pulse
simultaneously on both LED's
Flashing 1 short pulse per sec
simultaneously on both LED's
Flashing 2 short pulses per sec
simultaneously on both LED's
Flashing 3 short pulses per sec
simultaneously on both LED's
Flashing x times simultaneously,
50% dutycycle
Flashing 1 HZ
In stable mode:
ON 90% dutycycle
OFF 10% dutycycle
In non stable
mode:
ON 10% dutycycle
OFF 90% dutycycle
Flashing 2 Hz alternating
50% dutycycle
* Possibility to disable both LEDs
26
Rev.00 - 10.2023 | CA12CA/EA/KA Capacitve sensors with IO-Link interface | © 2023 | CARLO GAVAZZI Industri
Yellow LED
In SIO and IO-Link mode
ON
OFF
ON
OFF
Flashing 10 Hz
50% dutycycle
Flashing
(0.5 ... 20 Hz)
In SIO mode only
All teach procedures are starting with a flash
ON 100 ms
OFF until teach-window start
In IO-Link mode only
-
Power Function
ON ON (Stable)* SSC1
ON OFF (Stable)* SSC1
ON ON (Not stable) SSC1
- OFF (Not stable) SSC1
ON Output short-circuit
ON Timer indication
External teach by wire.
ON
Only for single point mode
ON Teach background (3-6 sec)
ON Teach target (6-9 sec)
ON Cancel teach procedure (> 9 sec)
ON Teach Successful
ON Sensor is in IO_Link mode
ON Find my sensor