Descargar Imprimir esta página

Dreame H12 Dual Manual De Usuario página 8

Ocultar thumbs Ver también para H12 Dual:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 45
How to Use
EN
Switching Modes
The appliance is powered on in Auto mode by default, you can switch to Suction
mode as needed.
Auto Mode
While washing the floor, the appliance can adjust its suction
power according to different situations.
Suction Mode
If Suction mode is selected, the appliance will vacuum water only and the
brush roller will not be dampened. No water is coming out of the Clean
Water Tank.
Standard Mode (Handvac)
When the appliance converts to a handheld vacuum, it is powered on by
default in Standard mode.
Turbo Mode (Handvac)
Press the handvac mode switch to select the Turbo mode.
Using as a Floor Washer
1. Fill the Clean Water Tank: Press the Clean Water Tank release button to remove the
tank. Open the tank cover and fill the tank with clean water. Re-install the Clean Water
Tank and ensure it clicks into place.
Note:
For better cleaning performance, it is recommended to add 10ml detergent with the bottle cap into the full
Clean Water Tank, then shake gently and evenly for use.
Do not add any liquids other than the officially-approved cleaner.
9
9
How to Use
2. Start cleaning: Gently step on the brush cover and recline the appliance backwards.
Press the power switch
to start operating, press the mode switch
between the Auto mode and the Suction mode according to your needs.
<140°
Note:
Do not vacuum any foamy liquids.
If the appliance is in the upright position while working, the current task will be suspended.
The appliance is suitable for cleaning floors, marble, tiles and other hard surfaces.
Do not recline the appliance backwards more than 140° to prevent the appliance from leaking water.
When the appliance is in operation, do not lift it off the ground, move it, tilt it or lay it flat. Doing so may cause the
used water to flow into the motor.
3. Empty the Used Water Tank: Press the Used Water Tank release button to take out the
tank. Remove the tank cover and pour out the used water. Close the tank cover and re-
install the tank before use.
2
1
to switch
3
4
10
10
EN

Publicidad

loading