Tascam BD-MP1MKII Manual Del Usuario página 10

Handling discs
o Load discs with their recorded sides down.
o Load discs when the disc tray is completely open.
o Align discs with the tray guide and place them so they are level.
o Do not touch the recorded (unlabeled) side. Fingerprints, oils
and other substances can cause errors during playback.
o If fingerprints or dust adhere to the recorded side of a disc,
wipe it gently with a soft dry cloth from the center towards
the outside edge.
o Dirt on discs can lower video and sound quality, so clean
them and always store them in a clean state.
o Do not use any record spray, anti-static solutions, benzene,
paint thinner or other chemical agents to clean discs as they
could damage the delicate playing surface. It may cause discs
to become unplayable.
o Do not apply labels or other materials to discs. Do not use
discs that have glue or sticky residue from having had tape,
stickers or other materials applied to their surface. Such discs
could become stuck in the unit or cause it to malfunction.
o Never use commercially-available disc stabilizers. Using stabiliz-
ers with this player could prevent playback or damage the unit.
o Do not use cracked discs.
o Do not use discs that are irregularly shaped, including discs
shaped like hearts, business cards and octagons because
using such discs could cause the unit to malfunction.
o Copy Control CDs have been sold by several record compa-
nies in an attempt to protect their copyrights. Since some of
these discs do not comply with the CD specifications, they
may not be playable on the unit.
ATTENTION
o Only load one disc at a time. Loading two or more discs at the
same time could cause malfunction and damage the discs.
o Do not push the disc tray in when the power is in standby.
Doing so could cause malfunction.
NOTE
If a disc that cannot be played back or a disc that is upside
down is loaded in the unit, "UNK DISC" will appear on the
display.
10
TASCAM BD-MP1MKII