Tascam BD-MP1MKII Manual Del Usuario página 20

Function
Wireless Setting
BD-Live BUDA
BD-LIVE Connection
Proxy Settings
* "Wireless" connection can only be used if a USB-wireless LAN adapter has been connected to the unit.
A USB-wireless LAN adapter is not included with this unit. Wireless LAN adapters can be used, but operation is not guaranteed because acquisition of applicable prod-
ucts is difficult.
** If USB flash drives have been connected to both the front and back USB ports, the one first recognized by the unit will be used for external memory.
Display Settings
TV
Function
TV Screen
Resolution
TV System
20
TASCAM BD-MP1MKII
Options
More...
BUDA Information,
BUDA Setup
Permitted,
Partially Permitted,
Prohibited
Disable, Enable
Options
16:9 Full,
16:9 Normal,
4:3 Pan & Scan,
4:3 Letterbox
Auto,
480i/576i,
480p/576p,
720p,
1080i,
1080p
NTSC, PAL, Multi
Explanation
Use this to make wireless connection settings.*
Scan
The unit will search for access points, allowing selection of a
network.
Manual
An SSID can be set manually to connect.
Auto
Connection is possible using Wi-Fi Protected Setup (WPS)
standards.
Set the storage location used to save BD-Live contents.
BUDA Information
This shows the amount of open space in the storage location
used to save content.
Press the ENTER button to show the "Fmt buda" button, and
press the ENTER button again.
This creates a BUDA folder in the selected storage location.
BUDA Setup
The storage location used by BUDA can be set to an external
device or the internal storage.
External : A USB flash drive connected to the unit will be used.**
Onboard : The internal storage of the device will be used.
Select the access level for BD-Live contents on the Internet.
Permitted
All contents can be accessed.
Partially Permitted
Specific contents can be accessed.
Prohibited
BD-Live contents will be blocked.
Set whether or not to connect this unit to the Internet through a
proxy server.
Disable
Do not use a proxy server.
Enable
A proxy host and proxy port can be set.
Explanation
Use to set the display aspect ratio.
o 16:9 Full: Always make the aspect ratio 16:9. 4:3 video will also
be made 16:9.
o 16:9 Normal: Usually make the aspect ratio 16:9. 4:3 video will be
shown with black bands on the left and right sides.
o 4:3 Pan & Scan: Always make the aspect ratio 4:3. 16:9 video will
also be made 4:3.
o 4:3 Letterbox: Usually make the aspect ratio 4:3. 16:9 video will
be shown with black bands on the top and bottom.
Use to set the image resolution.
o If Auto is selected, this unit will detect the optimal resolution for
the monitor or TV. In this case, a message confirming the saving
of the selection will appear. Select "OK" as necessary.
o When a setting value is changed, a confirmation to approve sav-
ing will appear. Press OK to retain the setting.
Select the broadcast format* of the device connected to the unit.