Tascam BD-MP1MKII Manual Del Usuario página 24

Making connections
This is an example of connections with the unit.
Precautions before making connections
o Carefully read the operation manuals of the devices to be connected and then connect them correctly.
o Before making connections, turn this unit and all equipment to be connected off (standby).
o Install all connected devices, including this unit, so that they are powered from the same line. When using a power strip or similar
device, be sure to use one that has high current capacity (thick cable) in order to minimize fluctuations in power voltage. Moreover, do
not bundle or wrap power cords.
o Connect cable types correctly. (Be careful not to insert cables into the wrong connectors or with the wrong orientation.)
o This unit has been designed with the assumption that it will be used connected by HDMI to a TV or monitor. When using it, please
connect it by HDMI to a TV or monitor.
Mixer, recorder, amp, etc.
ANALOG
IN
(UNBALANCED)
L R
R L
ANALOG IN
(BALANCED)
Mixer, recorder, amp, etc.
Installing rackmount ears
The included rackmount ears must first be attached before
mounting this unit in a rack.
o Refer to the illustration below when attaching them.
24
TASCAM BD-MP1MKII
To 7.1 sound system
USB flash drive
DIGITAL IN HDMI IN
TV, display, etc.
NOTE
o A Phillips screwdriver is necessary for attachment.
o The attachment holes in the included rackmount ears are
elongated, allowing adjustment so that the unit does not
stick out of the rack when attached.
Computer
Network router, etc.