Publicidad
Idiomas disponibles
Idiomas disponibles
1.2.2 Icons for the comprehensive view
Name
Icon
Pump
Heater step
DHW Heater
Solar
Compressor
Boiler
Tariff
Defrost
Central/Local
Forced OFF
Auto ON/OFF
Test Run
Anti-Legionella
DHW boost
ECO mode
Night Shift
CASCADE
CONTROLLER
PMEN0602 rev.0 - 05/2023
This icon informs about pump operation.
There are three available pumps on the system. Each one is numbered, and its
corresponding number is displayed below to the pump icon when it is operating
Indicates which of the 3 possible heater steps is applied on space heating
Informs about DHW Heater operation. (If it is enabled)
Combination with solar energy
Compressor enabled (For YUTAKI S, S COMBI and M)
Compressors enabled.
1: R410A/R32
2: R-134a (For YUTAKI S80)
Auxiliary boiler is working
Tariff signal informs about some cost conditions of the consumption of the system
Defrost function is active
No icon means local mode
-
Central mode (Three types of control: Water, Air or Full)
When forced off Input is configured and its signal is received, all the configured
items on the comprehensive view (C1, C2, DHW, and/or SWP) are shown in OFF,
with this small icon below
When daily average is over auto summer switch-off temperature, circuits 1 and 2
are forced to OFF
(Only if Auto ON/OFF enabled)
Informs about the activation of the "Test Run" function
Activation of the Anti-Legionella operation
It activates the DHW heater for an immediate DHW operation
No icon means Comfort mode
-
ECO/Comfort mode for circuits 1 and 2
Informs about night shift operation
Informs about the activation of the "CASCADE" mode.
Explanation
1
6
Publicidad
