Publicidad
Idiomas disponibles
Idiomas disponibles
1.8 Menu
1.8.1 Operation information
In operation information menu it is possible to find the most important setting parameters of the
system besides the information of the operation conditions.
Detailed information about:
• Operation status
• Water inlet temperature
• Water outlet temperature
• Water setting temperature
• Outdoor ambient temperature
• Outdoor ambient 2 temperature
• Outdoor ambient average temperature
• Second ambient average temperature
• 24h average temperature
Detailed information about Circuit 1-2:
• Operation (Demand ON/OFF)
• Mode (Eco/Confort)
• Room temperature
• Room setting temperature
• Current water temperature
• Water setting temperature
• Water OTC setting temperature
• Mixing valve position (only for circuit 2)
Detailed information about DHW:
• Operation
• Current temperature
• Setting Temperature
• Electrical Heater Status
• Electrical Heater Operation
• Legionella Status
• Legionella Operation
PMEN0602 rev.0 - 05/2023
1 / 3
Detailed information about Heat Pump:
• Water Outlet PHEX Temperature
• Two3
• Water Flow Level
• Water Pump Speed
• Outdoor Ambient temperature
• Outdoor Ambient 2 temperature.
• Gas temperature
• Liquid T
• Discharge Gas temperature
• Discharge Gas temperature (R134a)
• Evaporation Gas temperature
• Suction Gas temperature (R134a)
• Discharge Pressure
• Discharge Pressure (R134a)
• Suction Pressure (R134a)
• Ind. Exp. Valve Open.
• Ind. Exp. Valve 2 Open.
• Out. Exp. Valve Open.
• Inverter Op. Freq.
• Inverter Op. Freq. (R134a)
• Defrosting
• Cause Of Stoppage
• Compressor Curr.
• Compressor Curr. (R134a)
• Unit Capacity
• Unit Type
1
35
Publicidad
