Sony SDM-S73 Guía De Instalación Rápida página 6

Self-diagnosis function
This monitor is equipped with a self-diagnosis function. If there is
a problem with your monitor or computer(s), the screen will go
blank and the 1 (power) indicator will light up in green.
If the function tells you the monitor may have a potential failure,
consult your authorized Sony dealer.
If the picture disappears from the screen and the
1 (power) indicator is green
1
Turn off the 1 (power) switch and disconnect the
video signal cables from the monitor.
2
Turn the monitor on by pressing the 1 (power)
switch.
If all four color bars appear (white, red, green, blue), the monitor
is working properly. Reconnect the video input cables and check
the condition of your computer(s).
If the color bars do not appear, there is a potential monitor failure.
Displaying this monitor's
information
While the monitor is receiving a video signal, press and
hold the MENU button for more than 5 seconds until the
information box appears.
Press the MENU button again to make the box disappear.
Example
MENU
INFORMATION
MODEL : SDM-S53
SER. NO : 1234567
MANUFACTURED : 2003-52
If any problem persists, call your authorized Sony dealer and give
the following information:
• Model name: SDM-S53, SDM-S73 or SDM-S93
• Serial number
• Detailed description of the problem
• Date of purchase
• Name and specifications of your computer and graphics board
Specifications
LCD panel
Panel type: a-Si TFT Active Matrix
Picture size:
15 inch (38 cm) (SDM-S53)
17 inch (43 cm) (SDM-S73)
19 inch (48 cm) (SDM-S93)
Input signal format
RGB operating frequency*
Horizontal × Vertical:
28–61 kHz × 48-75 Hz (SDM-S53)
28–80 kHz × 48-75 Hz (SDM-S73/S93)
6
(US)
Resolution
Input signal levels
Power requirements
Power consumption
Operating temperature
Dimensions (width/height/depth)
Model name
Serial number
Week and
Mass
year of
manufacturee
Plug & Play
Included items
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
Horizontal × Vertical: Max.
1024 dots × 768 lines (SDM-S53)
1280 dots × 1024 lines (SDM-S73/S93)
Analog RGB video signal
0.7 Vp-p, 75 Ω, positive
SYNC signal
TTL level, 2.2 kΩ, positive or negative
(Separate horizontal and vertical, or composite sync)
0.3 Vp-p, 75 Ω, negative (Sync on green)
100 – 240 V, 50 – 60 Hz, Max. 0.6 A (SDM-S53)
100 – 240 V, 50 – 60 Hz, Max. 1.0 A (SDM-S73/S93)
Max. 25 W (SDM-S53)
Max. 45 W (SDM-S73)
Max. 50 W (SDM-S93)
5 – 35 C
°
Display (upright):
SDM-S53
Approx. 339×370×186 mm (with stand)
×14 ×7
3 5 3
(13 / / / inches)
8 8 8
Approx. 339×275×53 mm (without stand)
3 ×10 7 ×2 1
(13 / / / inches)
8 8 8
SDM-S73
Approx. 367×411×215 mm (with stand)
1 ×16 1 ×8 1
(14 / / / inches)
2 4 2
Approx. 367×315×60 mm (without stand)
×12 ×2
1 1 3
(14 / / / inches)
2 2 8
SDM-S93
Approx. 412×445×234 mm (with stand)
×17 ×9
1 5 1
(16 / / / inches)
4 8 4
Approx. 412×350×64 mm (without stand)
×13 ×2
1 7 5
(16 / / / inches)
4 8 8
SDM-S53
Approx.3.7 kg (8 lb 2 oz) (with stand)
Approx.2.7 kg (5 lb 15 oz) (without stand)
SDM-S73
Approx.5.4 kg (11 lb 14 oz) (with stand)
Approx 4.1 kg (9 lb) (without stand)
SDM-S93
Approx. 6.6 kg (14 lb 8 oz) (with stand)
Approx. 5.2 kg (11 lb 7 oz) (without stand)
DDC2B
See "Setup."