ENGLISH
4. OPERATION
The display panel is located on the top of the refrigerator door.
The temperature can be adjusted by pressing the key '
the indicator of the current mode will switch off while the indicator of the next mode will light
up, and the mode setting will be confirmed if no key is pressed within 5 seconds (otherwise
the mode setting will be invalid). After the setting has been made, the temperature will be
immediately controlled according to the mode setting.
Fig. 3
1. Fast Cool icon
2. Temperature level icons
3. Temperature level selection
The temperature mode cycle is as follows: "5→4→3→2→1→FAST COOL→5"
5
When you need a cooler temperature.
4
3
Normal use.
2
When you don't need a cooler temperature.
1
Fig. 4
-
When the temperature mode remains unchanged, set the air regulator from left to right–
the refrigerator temperature decreases while the freezer temperature increases.
-
When the temperature mode remains unchanged, set the air regulator from right to left–
the refrigerator temperature increases while the freezer temperature decreases.
-
It is recommended that the air regulator be set to the middle position. When you need
a lower temperature in the freezer compartment, correctly set the air regulator to the
left–the temperature in the freezer compartment decreases while the temperature in the
refrigerator compartment increases. When the temperature meets the requirements, set
the air regulator back to the middle position.
The refrigerator thermostat and the air regulator must be used together.
70
'. Every time the "
" key is pressed,