Husqvarna GZ381 Manual De Usuario página 19

Introduction................................................................... 19
Safety............................................................................20
Assembly...................................................................... 24
Operation...................................................................... 24
Maintenance................................................................. 30
Intended use
This chainsaw for forest service is designed for forest
work such as felling, limbing and cutting.
Note:
National regulations can set limit to the
operation of the product.
Product overview
(Fig. 1)
1. Cylinder cover
2. Air purge bulb
3. Start/stop switch
4. Rear handle
5. Information and warning decal
6. Fuel tank
7. Carburetor adjustment screws
8. Starter handle
9. Starter
10. Chain oil tank
11. Product and serial number plate
12. Front handle
13. Chain brake and front hand guard
14. Muffler
15. Saw chain
16. Bar tip sprocket
17. Guide bar
18. Spiked bumper
19. Chain catcher
20. Chain tensioning screw
21. Clutch cover
22. Right hand guard
23. Throttle trigger
24. Throttle trigger lockout
25. Guide bar cover
26. Combination wrench
27. Operator's manual
Symbols on the product
(Fig. 2)
WARNING! Be careful and use the
product correctly. This product can cause
1284 - 005 - 09.11.2022
Contents
Troubleshooting............................................................ 37
Transportation and storage...........................................38
Technical data.............................................................. 38
Accessories.................................................................. 39
Warranty....................................................................... 41
Introduction
Product description
The RedMax GZ381 is a chainsaw model with a
combustion engine.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
(Fig. 12)
(Fig. 13)
serious injury or death to the operator or
others.
Read the operator's manual carefully
and make sure you understand the
instructions before you use this product.
Always wear approved protective helmet,
approved hearing protection and eye
protection.
Use 2 hands to operate the product.
Do not operate the product with one hand
only.
Do not let the guide bar tip touch an
object.
Warning! Kickback can occur when the
guide bar tip touches an object. A
kickback causes a lightning fast reverse
reaction that throws the guide bar up and
in the direction of the operator. Can cause
serious injury.
Chain brake, engaged (right). Chain
brake, disengaged (left).
Choke.
Air purge bulb.
Fuel.
Chain oil fill.
19