cecotec HYDROBOOST 3200 INDUCTION PROCLEAN Manual De Instrucciones página 6

- Make sure that the safety devices are working properly
before using the machine. Do not remove or modify any
parts of the gun or the product itself.
- It is very important to know how to stop the machine and
release the pressure quickly before using it, and to become
thoroughly familiar with its operation.
- Stay alert to what you are doing during operation.
- Do not operate the machine when fatigued or under the
influence of alcohol or drugs.
- Do not use the device if its cord or any of its parts are
damaged, e.g. the safety elements, the high-pressure hose
or the trigger of the gun.
- Make sure that there are no persons in the area where the
device is to be used.
- Do not tilt your body to reach the product or stand on an
unstable support. Keep good balance at all times.
- Follow the maintenance instructions specified in this
manual.
- Make sure the product is placed on a stable surface during
operation, transport, assembly or disassembly. Be careful
when moving it from one place to another to avoid damaging
it.
- In the event of an accident, switch off the machine and
disconnect it from the mains immediately.
- Keep the nozzle of the device clear.
- This symbol means: high pressure jets
can be dangerous if misused. The jet
must not be directed at people,
animals, live electrical equipment or
the device itself.
- Do not use the appliance within the reach of persons unless
they are wearing protective clothing.
H Y D R O B O O S T 3200 INDUCTION PROCLEAN
10
- Always wear safety goggles and protective clothing when
using or repairing the product. The use of hearing protection
is also recommended.
- Never place your hands or fingers in the water jet while the
product is in operation.
- Do not attempt to block or redirect water leaks with any part
of the body.
- Always activate the locking system, even when stopping for
a moment.
- Risk of explosion. Never spray flammable liquids or use the
pressure washer in areas where combustible dust, liquid or
vapours may be present. Do not use the machine in enclosed
buildings or near explosive atmospheres.
- Do not spray electrical appliances or cables.
- Do not remove the high pressure hose from the machine
while the system is being pressurised. To depressurise the
device, turn it off, stop the water supply and then press the
trigger 2 or 3 times.
- Do not activate the trigger locking system while the machine
is in operation.
- Do not operate the appliance unless all parts are properly
connected to the main body (handle, gun, nozzle, etc.).
- Make sure to turn on the water supply before turning on
the pressure washer. Running the pump without water can
cause serious damage to the pump.
- Do not use the pressure washer if any parts are missing or
damaged. Check the condition of the product regularly and
repair or replace damaged or worn parts immediately.
- Use only original spare parts supplied or recommended by
Cecotec to ensure safe operation.
- Use only the nozzle included with the product.
- Do not leave the high pressure hose unattended while the
device is operating.
H Y D R O B O O S T 3200 INDUCTION PROCLEAN
11