- Hold the high pressure hose and gun firmly when switching
on and while using the machine.
- Do not leave the unit running with the trigger released for
more than one minute, this could damage the pump.
- This device is not designed to pump hot water. Do not
connect to a hot water supply as this will significantly reduce
the shelf life of the pump.
-
This symbol means that this device is not suitable
to be connected to drinking water sources.
- Make sure the water inlet pressure is between 0.01 MPa and
0.4 MPa and that the inlet hose is at least 5 metres long.
- If the device is to be connected to a drinking water supply,
install a disconnector on the water pipe to prevent dirty
water from backing up and entering the drinking water
system. The disconnector shall comply with EN 60335-2-79
ANNEX A.
- Water that has flowed through backflow prevention devices
is considered non-drinkable.
- This device must not be controlled by external switching
elements such as timers, or connected to electrical circuits
that are continuously switched on and off.
- Release the trigger when switching from high to low
pressure.
- Adjust the spray nozzle.
- Keep the high pressure hose away from sharp objects. A
burst high pressure hose could cause injury. Inspect the high
pressure hose regularly and replace it if necessary. Do not
attempt to fix a damaged high pressure hose.
- Keep all connections dry and off the ground to avoid risk of
electric shock. Do not touch the plug with your hands wet.
H Y D R O B O O S T 3200 INDUCTION PROCLEAN
12
- Do not use a higher pressure than that permitted by the
parts of the pressurisation system (high-pressure hose,
connections, etc.). Make sure every component and
accessory is rated to withstand the maximum operating
pressure of the unit.
- The appliance should not be used by children. Children
must be supervised to make sure they do not play with the
appliance.
- This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning the use of the appliance in a safe way and
understand the hazards involved.
- High-pressure cleaning devices should not be used by
children or untrained personnel.
Repair of double insulated devices
Fig.1
- A double insulated device is equipped with two insulation
systems instead of grounding. Grounding means for double
insulated devices are not provided, nor should they be added
to the product. The repair of a double insulated appliance
requires extreme care and knowledge of the system and
should only be carried out by qualified personnel.
- Spare parts for a double insulated product must be identical
to the original parts. A double insulated appliance is signalled
with the words "Double Insulation" or "Double Insulated".
The device is signalled with the symbol shown in figure 1.
Extension cords
The use of extension cords is not recommended. If necessary,
use only extension cords designed for outdoor use, marked
H Y D R O B O O S T 3200 INDUCTION PROCLEAN
13