Stihl TS 500i Manual De Instrucciones página 48

English
Maintenance and Care
The following maintenance intervals apply in normal operating conditions. The
specified intervals must be shortened accordingly when working for longer than
normal or under difficult cutting conditions (extensive dust, etc.).
Complete machine
Operating controls
Manual fuel pump
Fuel pickup body in fuel tank
Fuel tank
Poly V-belt
Air filter (all filter components)
Cooling air intake slits
Cylinder fins
Spark arresting screen in muffler
Electronic water control
STIHL Injection
Spark plug
All accessible screws, nuts and bolts
46
Visual inspection (condition, leaks)
Clean
Check operation
Check
Have repaired by a servicing dealer
Test, check
Replace
Clean
Clean / retension
Replace
Replace
Clean
Have them cleaned by a servicing
1)
dealer
Test, check
Clean or replace
Test, check
Have them maintained by a servicing
1)
dealer
Check idle adjustment – abrasive cut-
ting wheel must not rotate
Have them maintained by a servicing
1)
dealer
Adjust electrode gap
Replace after 100 hours' operation
Retighten
X X
X
X X
X
1)
Only if there is a noticeable loss of engine power
X
X
x
X X
X
X
X
X X
X
X
X
X
x
x
X
X
TS 480i, TS 500i
X
X
X
X
X
X