Descargar Imprimir esta página

HAEGER NORTH POLE 270 COMBI+D Instrucciones De Uso página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting Guide
Caution! Before troubleshooting, disconnect the power supply. Only a qualified
electrician or competent person must do the troubleshooting that is not in this manual.
Important! There are some sounds during normal use (compressor, refrigerant
circulation).
Problem
Appliance does not
work.
The food is too warm.
Appliance cools too
much.
Unusual noises.
Water on the floor.
Side panel is hot.
This product is a household fridge. According to the national regulation,
household fridge can only be suitable to store food, and can't be used to store
other items such as blood, drug, and biological product and so on.
English
Possible Cause
Temperature regulation knob is set
at number "0".
Mains plug is not plugged in or is
loose.
Fuse has blown or is defective.
Socket is defective.
Temperature is not properly
adjusted.
Door was open for an extended
period.
A large quantity of warm food was
placed in the appliance within the
last 24 hours.
The appliance is near a heat
source.
Temperature is set too cold.
Appliance is not level.
The appliance is touching the wall
or other objects.
A component, e.g., a pipe, on the
rear of the appliance is touching
another part of the appliance or
the wall.
Water drain hole is blocked.
Condenser is inside the panel.
13
Solution
Set the knob at other
number to switch on the
appliance.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to
be corrected by an
electrician.
Please look in the initial
Temperature Setting
section.
Open the door only as long
as necessary.
Turn the temperature
regulation to a colder
setting temporarily.
Please look in the
installation location section.
Turn the temperature
regulation knob to a warmer
setting temporarily.
Re-adjust the feet.
Move the appliance slightly.
If necessary, carefully bend
the component out of the
way.
See the Cleaning section.
It's normal.

Publicidad

loading

Este manual también es adecuado para:

Cr-27s.015a