Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Before installing the cooktop, make sure that
•
The working surface is square and level, and there are no interfering structural members.
with space requirements.
•
The work surface is made of heat-resistant and insulating material.
•
If the hob is installed on top of an oven, the oven has a built-in cooling fan.
•
The installation shall comply with all clearance requirements and applicable rules and
regulations.
•
A suitable isolating switch is incorporated in the permanent wiring to provide complete
disconnection from the mains, mounted and fitted in accordance with local wiring rules and
regulations.
•
The isolating switch must comply with electrical regulations and provide 3 mm contact
separation in all poles.
•
The isolation switch must be easily accessible to the customer with the hob installed.
•
If you have any questions about the installation, please contact us. SAT PANDO
After installing the cooktop, make sure that
•
The power cable is not accessible through cabinet doors or drawers.
•
There is an adequate flow of fresh air from the outside of the enclosure to the base plate of the
enclosure.
cooking.
•
If the hob is installed on top of a drawer or cabinet, a thermal protection barrier must be
installed under the base of the hob.
•
The isolation switch is easily accessible to the customer.
Before attaching the fixing brackets
The appliance must be placed on a stable and smooth surface (use the packaging). Do not apply force
on the controls protruding from the hob.
Adjusting the position of the bracket
Attach the worktop to the work surface by inserting 8/2 brackets into the underside of the worktop.
(see picture) before installation.
Adjust the position of the bracket to suit different tabletop thicknesses.
Models: 3150-3151, 3210-3211
Models: 3110-3111
33
Publicidad
