Fitting The Front Cover; Components And Accessories - Carel humiSteam Basic Serie Manual Del Usuario

1.7 Fitting the front cover

Models UE001 to UE018:
1
3
Fig. 1.g
1. turn the red oval-shaped plate with the CAREL logo, revealing the
fastening hole below;
2.
slip the cover onto the frame (keeping it slightly raised and tilted), until it
rests on the rear edges;
3. tighten the earth screw using a screwdriver;
4.
turn the red oval-shaped plate with the CAREL logo until covering the
fastening hole below7.
Models UE025 to UE065:
2
1
Fig. 1.h
1. slip the cover/covers onto the frame (keeping it/them slightly raised and
tilted), until it rests on the rear edges;
2.
tighten the screws on the top of the humidifi er using a screwdriver.
Important : in models UE025 to UE065 open the electrical Important
compartment on the humidifi er using the lock with slot.
4
2
Fig. 1.i

1.8 Components and accessories

Once having opened the packaging and removed the front cover of the
humidifi er, make sure the following are included::
□
kit of screws with plugs for
wall-mounting
□
models UE025 to UE065
only: code FWHDCV0000
non-return valve with
connection pipe
9
□
kit code 98C615P003
of connectors for
electronic board
□
models UE025 to UE065
only: angular plastic hose
(drain water connection)..
"UE BASIC" +030220632 - rel. 2.3 - 20.01.2009
ENG
the