Nilox C3 Manual Del Usuario página 100

Cleaning
In order to avoid corrosion of the bike, it is necessary to rinse your bike regularly with fresh water,
especially if it has been exposed to sea air.
Cleaning must be done with a sponge, a basin of warm soapy water and a jet of water (no pressure).
RECOMMENDATION : Take special care not to use a high pressure water jet cleaner.
Lubrication
Lubrication is essential on the various components that are in motion in order to avoid corrosion. Oil
the chain regularly, brush the sprockets and chainrings, periodically introduce a few drops of oil into
the brake and derailleur cable sheaths.
It is advisable to start by cleaning and drying the elements to be lubricated.
It is advisable to use specific oil for the chain and the derailleur. Grease must be used for the other
components.
Regular checks
Regarding the tightening of the bolts: lever, crank, pedals, stems.
The tightening torques to be applied are as follows:
COMPONENTS
Pedals on crank arms
Crank arm on bracket
Stem/handlebar tightening
Headset tightening
Brake lever
Brake callipers
Seat
Seat post clamp
Wheel
RECOMMENDED TORQUE
(Nm)
10 – 15
18 - 20
9 - 10
4 – 5
6 – 8
6 – 8
20 – 22
---
30
SPECIAL INSTRUCTIONS
Grease the threads
Grease the threads
Plunger screw (stem)
Quick release
Quick release
100