Nilox C3 Manual Del Usuario página 97

brake pads are standard, replace them when the pad no longer has any friction elements .
Don't forget not only new brake pads must be lapped . Breaking -in is done by using the bike for a few
minutes and applying the alternating brakes between stops abrupt and light braking .
Replacement of brake pads
Remove the wheel and remove thr old brake caliper pads . Place the pads new In the stirrup so that
that the braking surfaces are touching . Don't touch not the braking surfaces . Insert the pads one by
one In the brake caliper .
Wheel wear
As all piece wear , the rim must be controlled regularly . The hoop can weaken and break , you doing
lose control or fall.
NB: it is important to check the state of wear of the rims . A rim damaged can be
dangerous and must be replaced .
97