Nilox C3 Manual Del Usuario página 106

Below is the list of accessible data displayed through the application:
NOT.
1
2
3
4
5
6
7
ERROR CODE DEFINITION
Error code
The accelerator is
not not in place
"05"
System over voltage
"07"
protection
The Hall signal in the
"08"
motor is abnormal
Phase wire in motor
"09"
abnormal
Function
Speed
Level assistance
Battery
Fluent
Lighting
Journey
ODO
Cause
1. Check if the accelerator is in place .
2. Check if the cable accelerator is properly connected or if
the cable (from throttle to controller ) is damaged .
3. Troubleshoot the room defective :
1) Replace the accelerator
2) Replace the controller
1. Check if the nominal voltage of the battery is the same as
that of the controller .
2. Troubleshoot the defective part :
1) Replace the battery
2) Replace the controller
1. Check if the motor cable is properly connected Or if the
cable (from the motor to the controller ) is damaged .
2. Troubleshoot the defective part :
1) Replace the motor
2) Replace the controller
1. If you ride for a long time , turn off the system and let the
engine cool .
NOT.
8
9
10
11 Sensor signal
12 Battery information
13 System information
14
Hubmotor System
Function
Align
heartbeat
calories
Error code
106