Invacare Aquatec ORCA Manual Del Usuario página 13

4.
Fold the side flaps of the seat outwards.
5.
NOTICE!
– Ensure that the side flaps are folded
outwards before placing the backrest onto
the seat.
Place the backrest A (without the hand control) onto
the seat so that the hooks B of the backrest fit into the
hinges C of the seat plate D.
1574469-F
Fig. 4-5
Fig. 4-6
6.
Risk of Damage
Damage to the product caused by the spindle
foot slipping out.
– Make sure that the spindle is fully retracted
and the spindle foot is level and not
twisted, before folding up the backrest.
– Once the backrest is folded up, ensure
that the spindle foot is in the spindle foot
retainer.
B
Push down the backrest onto the seat plate at the
position of the label A with one hand in order to
engage the hooks into the hinges.
Aipsum
Fig. 4-7
Setup
13