SICK WTM4SP-A00 Serie Instrucciones De Uso página 47

6 Commissioning
6.1 Videos
6.2 Alignment
8028212/2023/10/20 | SICK
Subject to change without notice
NOTE
After successful connection of the product to the IO-Link Master, the green (Power) LED
flashes to indicate a functioning IO-Link communication between the master and device.
The following tutorial shows how to commission the sensor:
Table 7: Video overview
Selecting MultiMode operating mode and teach‐
ing in the sensor
Alignment with background suppression
Align the sensor with the object. Select the position so that the red emitted light beam
hits the center of the object. You must ensure that the optical opening (front screen) of
the sensor is completely clear [see
Figure 5: Sensor on object
Alignment with foreground suppression
Align the sensor with the background. You must ensure that the optical opening (front
screen) of the sensor is completely clear
Figure 6: Alignment on background
OPERATING INSTRUCTIONS
https://video.sick.com/media/t/0_dr9zfbj8
figure 5].
[see figure 6].
O P E R A T I N G I N S T R U C T I O N S | WTM4S
en
47