Descargar Imprimir esta página

GE PVM9215 Manual Del Usuario página 28

Ocultar thumbs Ver también para PVM9215:

Publicidad

Idiomas disponibles

Idiomas disponibles

Before you call for service...
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to cull for service.
Oven will not start
Possible Causes
What To Do
A fuse in your home may be
blown or the circuit breaker
tripped.
Power surge.
• Unplug the microwave oven, then plug it back in.
Plug not fully inserted into wall
, Hake sure the 3-prong plug on the oven is fully inserted
outlet,
into wall outlet.
Door not securely closed.
• Open the door and close securely.
Power Saver button not engaged. , Push the Power Sever button so it is pressed in.
Control panellighted,
Door not
securely
closed.
• Open the door and close securely.
yet oven will not start
START/PAUSE button not pressed • PressSTART/PAUSE.
after entering cooking selection.
Another selection entered
. PressCANCEL/OFF.
already in oven and CANCEL/OFF
button not pressed to cancel it.
Cooking time not entered after
, Hake sure you have entered cooking time after pressing
pressing COOKTIME.
TIMECOOK.
CANCEL/OFF was pressed
• Resetcooking program and press START/PAUSE.
accidentally.
Food weight not entered after
• Hake sure you have entered food weight offer selecting
selecting AUTO DEFROST or
AUTO DEFROST or FASTDEFROST.
lib Quick DEFROST.
Food type not entered after
, Hake sure you hove entered a food type.
pressing AUTO COOK.
CONTROLLOCKED
The control has been locked.
, Pressand hold CANCEL/OFFfor about :3seconds
appears on display
to unlock the control.
• Replace fuse or reset circuit breaker.
Floor of the oven is warm
even when the oven has
not been used
The cooktop light is located
, This is normal.
below the oven floor. When
light is on, the heat it produces
may make the oven floor get warm.
You hear an unusual
low-tone beep
You hove tried to change
the power level when it is
not allowed.
, Huny of the oven's features are preset and
cannot be changed.
28

Publicidad

loading