GE PP9830 Manual Del Propietario E Instalación página 22

Z
0
i
I-.
U
=)
!-.
Z
u
Z
0
g
_u
_u
Z
i
Installation Instructions
INSTALLING THE COOKTOP
F31ATTACHING A BLOWER
TRANSITION DUCT
Use a blower transition duct for all downward duct
installations to connect to 6" round standard ductwork. This
5_4"x 10" rectangle to 6" round transition duct is available at
your local building supply store.
_cr eother
..... side)
Install the transition duct to the blower outlet. Secureall
joints with duct tape to assure an airtight seal.
F_ BLOWERELECTRICAL CONNECTIONS
• Loosenthe two screws and remove and discard the sheet
metal strap covering the g-pin connector on the cooktop
bottom. Savethe screws for reinstallation later.
screws and
discard strap
•Connect the S-pin plug on the blower assembly to the
matching g-pin receptacle on the bottom of the cooktop.
B-pin
connectors
• Foldall wires into the electrical enclosure.Securethe
enclosure with the screws removed earlier,making sure
that no wires are trapped.
i
"" B-pin
connectors
i Electrical
enclosure
Flexible
conduit
F_I CONNECTINGTHE DUCTWORK
Connect the ductwork prepared in Steps 6 and 7
to the blower.
2 49 80635 2