cecotec CAFELIZZIA FAST PRO Manual De Instrucciones página 44

ENGLISH
No steam
Coffee is not brewed well
Milk is not properly
frothed
The indicator lights blink
6. TECHNICAL SPECIFICATIONS
Product: Cafelizzia Fast Pro
Product reference: 01635
Rated power: 1350 W
Voltage: 220 - 240 V
Frequency: 50 Hz
Cecotec Innovaciones S.L
Tax number: B-97937890
Av. Reyes Católicos, 60, 46910, Alfafar, Valencia (Spain)
www.cecotec.es
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
44
Te steamer is blocked. The
steam knob is not set to
the required position or
preheating is not completed.
Too much or too little coffee
powder.
The milk used is not suitable
for this function. The steam
function was enabled before
the indicator light turned on.
The temperature is too high
after steaming.
Use a fine wire to feed it
through the duct and clean
the steamer after each use.
Turn the steam knob to the
steam position and wait for
the preheating process to
complete.
1 cup of coffee requires 1
coffee spoon and must be
pressed down. Coffee powder
cannot be too thick or too
fine. Too thick coffee cannot
be completely extracted, too
fine will affect the amount
and quality of coffee.
Use whole milk. Steam can
only be released after the
steam indicator light changes
from flashing to steady light.
Cool down the appliance.