Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
The noise emission values and vibration
emission value can vary from the specified
values during the actual use of the power
tool, depending on the type and the manner
in which the electric tool is used, and in par-
ticular the type of workpiece being pro-
cessed.
Try to keep the stress as low as possible. For example:
Limit working time. In doing so, all parts of the operating
cycle must be taken into account (such as times in
which the power tool is switched off or times in which it
is switched on, but is not running under a load).
7
Unpacking
WARNING
The product and the packaging material are not
children's toys!
Do not let children play with plastic bags, films or
small parts! There is a danger of choking or suffo-
cating!
• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. Immediately report any damage to the trans-
port company that delivered the Product. Later claims
will not be recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
8
Before commissioning
CAUTION
Danger of injury!
Do not insert the battery until the battery-powered tool
is ready for use.
8.1
Fitting/replacing the saw blade (11)
(Fig. 1, 3)
You can store the Allen key (25) in the Allen key storage
(19).
WARNING
Tool attachments may be sharp and become hot during
use. Always wear protective gloves when handling the
tool attachments.
CAUTION
Keep your hands away from the tool attachment when
the product is in operation.
ATTENTION
The saw blade is not pre-mounted!
1. Set 0 mm on the cutting depth scale (20) and lock the
lever (21), see 9.3
8.1.1
CAUTION
The marked running direction on the saw blade must
match the marked running direction on the fixed protec-
tive cover.
WARNING
Make sure that the saw blade is suitable for the speed
of the tool.
1. Swing back the protective cover (14) with the retract-
ing lever (15) and place the saw blade (11) from be-
low into the fixed protective cover (10) and onto the
spindle.
2. Place the flange (13) on the saw blade (11).
3. Press the spindle lock (5) and fix the saw blade (11)
with the washer (12a) and the Allen screw (12). Use
the Allen key (25).
8.1.2
1. Swing back the protective cover (14) with the retract-
ing lever (15) and place the product on a level sur-
face.
2. Press and hold the spindle lock (5).
3. Loosen the Allen screw (12) with washer (12a) with
the Allen key (25).
4. Remove the Allen screw (12) with washer (12a) and
the flange (13).
5. Lift the product, hold back the protective cover (14)
and carefully remove the saw blade (11) downwards
from the fixed protective cover (10).
8.2
Inserting/removing the battery (28)
into/from the battery mount (18)
(Fig. 2)
Inserting the battery
1. Push the battery (28) into the battery mount (18). The
battery (28) clicks into place audibly.
Removing the battery
1. Press the unlock button (27) of the battery (28) and
remove it from the battery mount (18).
8.3
Fitting the suction adapter (26)
(Fig. 7)
Notes:
If necessary, it is possible to connect the vacuum hose of
a vacuum cleaner directly to the suction adapter on the
product without a reduction piece.
www.scheppach.com
Mounting the saw blade
Removing the saw blade
GB | 23
Publicidad
