Publicidad
Idiomas disponibles
Idiomas disponibles
MOUNTING THE SAE J1772 CONNECTOR
HOLSTERS
The SAE J1772 connector holsters are included to provide a
convenient protective housing for the SAE J1772 connector head
when it is not in use.
•
The SAE J1772 connector holster should be placed so that
users have easy and safe access to the SAE J1772 connector.
•
•
For indoor installation, mount the SAE J1772 connector holster
between 18" and 48" above the ground or grade.
•
•
For outdoor installation, mount the SAE J1772 connector
holster between 24" and 48" above the ground or grade.
•
•
The SAE J1772 connector holster has two vertically aligned
mounting holes spaced 5.45" apart, one each on the enclosure
top and bottom. Use a ruler or template to mark hole locations
on the mounting surface.
•
•
The vertical alignment of the HCS-D and connector holster
mounting holes allows for the convenient mounting of both
components onto the same post or wall structure. For example,
the holster may be mounted directly above the HCS-D.
•
•
Place the SAE J1772 connector holster such that both mounting
holes can take advantage of solid structural framing inside of
the wall or a strong wall surface such as plywood.
•
•
A set of exterior wood screws and stainless steel washers
are included for the purposes of mounting the SAE J1772
connector holster to a wooden surface.
•
•
For mounting to a solid surface such as concrete, brick, or
stone, alternate hardware may need to be procured. Examples
of solid-wall mounting hardware include multi-sets, wedge
anchors, and sleeve anchors. Use the type of mounting
hardware most appropriate for the supporting structure.
HCS-D User Manual
21
Publicidad
