Zipper ZI-STE2800 Instrucciones De Servicio página 34

12 SAFETY
This section contains information and important notes on the safe commissioning and handling of the ma-
chine.
For your safety, read this manual carefully before commissioning. This will enable you to handle
the machine safely and thus prevent misunderstandings as well as personal injury and damage
to property. Pay special attention to the symbols and pictograms used on the machine as well
as the safety information and danger warnings!
12.1 Intended use of the machine
The machine is intended exclusively for the following activities:
This machine is designed exclusively for operating electric devices whose max. performance is within the
specifications for the machine and the suitability according to the respective manufacturer's specifications
of the device to be operated is ensured. A higher starting current of inductive loads must be considered
ZIPPER MASCHINEN assumes no responsibility or warranty for any other use or use be-
yond this and for any resulting damage to property or injury.
12.1.1 Technical restrictions
The machine is designed for the work under the following conditions:
Relative humidity:
Temperature (for operation):
Temperature (Storage, Transport):
Max. altitude above sea level
12.1.2 Prohibited applications / Dangerous misuse
• Operating the machine without adequate physical and mental fitness.
Operating the machine without knowledge of the manual.
•
Modifying the machine design.
•
Operating the machine in wet and rainy conditions.
•
Operating the machine with wet hands.
•
Operating the machine in a potentially explosive environment.
•
Do not smoke nearby the machine while the machine is in operation.
•
• Operating the machine indoors or in closed areas.
• Never connect the machine to the main power supply (socket-outlet)!
Never connect the machine with other energy sources (generators)!
•
Operating the machine outside the technical limits specified in this manual.
•
Removing of the safety markings attached to the machine.
•
Modifying, circumventing or disabling the safety devices of the machine.
•
Never leave the machine unattended, especially when children are around!
•
The non-intended use or the disregard of the explanations and instructions described in this manual will
result in the expiration of all warranty claims and compensation claims for damages against ZIPPER
MASCHINEN GmbH.
12.2 User Requirements
The machine is designed to be operated by one person. The prerequisites for operating the machine are
physical and mental fitness as well as knowledge and understanding of the operating instructions. Persons
who, due to their physical, sensory or mental capabilities, inexperience or lack of knowledge, are unable to
operate the machine safely must not use the machine without supervision or instruction by a responsible
person.
Please note that locally applicable laws and regulations determine the minimum age of the operator and
may restrict the use of this machine!
Work on electrical components or equipment may only be carried out by a qualified electrician or under the
guidance and supervision of a qualified electrician.
Observe local regulations for electrical safety.
Put on your personal protective equipment before working on the machine.
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
N O TE
max. 65 %
+5° C to +40° C
-20° C to +55° C
1800m
ZI-STE2800 / ZI-STE5500 / ZI-STE8000 / ZI-STE8004
SAFETY
34